DNA Test Accuracy and Results
How accurate is a DNA paternity test, and what do the numbers in your report actually mean? This guide explains probability of paternity, inclusion and exclusion, inconclusive results, and how to read your Paternity.ph report.
The short answer
A DNA paternity test compares genetic markers (STR loci) between an alleged father and a child. If the alleged father cannot be excluded, the laboratory reports a probability of paternity — a case-specific figure that is often far above 99.9%. If he is excluded, the result is definitive.
There is no single "accuracy percentage" that applies to every case. The meaningful number is the probability of paternity that appears on your report, calculated from your samples. Testing is performed by Endeavor DNA, Inc., an A2LA and ISO/IEC 17025:2017 accredited laboratory.
What "accuracy" means in paternity testing
People often ask for a single accuracy figure, but paternity testing produces two very different kinds of answers, and they are not measured the same way:
- Exclusion (the alleged father is not the biological father) — when the laboratory finds genetic mismatches at multiple loci, the exclusion is definitive. An exclusion is not expressed as a probability; it is a conclusion.
- Inclusion (the alleged father cannot be excluded) — the laboratory reports a probability of paternity. This is a statistical figure specific to that case, based on the genetic evidence and the reference population used.
This is why responsible providers explain the actual reported figure rather than advertising a single blanket percentage. The probability depends on your samples, the markers analysed, and the population statistics applied.
The Laboratory Behind Your Results
The credibility of any paternity result rests on the laboratory that produces it. Paternity.ph testing is performed by Endeavor DNA, Inc., an independent laboratory based in Las Cruces, New Mexico, USA.
A2LA Accredited
Accredited by the American Association for Laboratory Accreditation (A2LA), Certificate Number 4049.01.
ISO/IEC 17025:2017
Accredited to the international ISO/IEC 17025:2017 standard for testing and calibration laboratories.
UK Ministry of Justice
Accredited as a body that may carry out parentage tests directed by the civil courts in England and Wales under section 20 of the Family Law Reform Act 1969.
Double Review
Every report is reviewed and signed by a Laboratory Supervisor and a Quality Manager before release.
Laboratory methods
Your samples are analysed using validated, industry-standard equipment and software:
- PowerPlex® Fusion System — a multiplex STR amplification kit that analyses a broad panel of genetic markers in a single reaction.
- ABI PRISM® 3130xl Genetic Analyzer — capillary electrophoresis used to separate and detect the amplified DNA fragments.
- GeneMapper® ID Software — industry software used to analyse the resulting DNA profile and generate the genetic data reported to you.
PowerPlex®, ABI PRISM® and GeneMapper® are trademarks of their respective owners. Laboratory accreditation details are as stated on Endeavor DNA, Inc. reports.
How to Read Your Statement of Results
Your report has a formal section called the Statement of Results. It states the laboratory's conclusion, the probability of paternity, and the genetic statistics behind it. Here is a representative example of how that section is worded on a personal-knowledge test:
Representative example — Statement of Results
Combined Direct Index
The alleged father cannot be excluded as the biological father of the tested child. Based on the analysis of STR loci listed above, the probability of paternity is 99.9999994%.
Combined Paternity Index
174,994,800
Probability of Paternity
99.9999994%
The probability of paternity indicated above is compared to an untested, unrelated, random individual of the Asian population (assumes prior probability = 0.50).
The undersigned verify that this report has been reviewed and that the interpretation of the results is correct.
Laboratory Supervisor · Quality Manager
Test results are for informational purposes only. Samples were not collected under a strict chain of custody. Patient names and sample origin cannot be verified. The results in this report are based only on the samples as received.
Names, signatures, dates and kit identifiers are redacted from the example above. Your own report contains the same categories of information with your specific genetic results.
Probability of Paternity Explained
The probability of paternity is the likelihood that the alleged father is the biological father, given the genetic evidence and a stated reference population. It is calculated from the Combined Paternity Index (CPI) using a prior probability (commonly 0.50).
Because it depends on the specific genetic data from your case, the figure is different for every family. In the representative example above, the CPI was 174,994,800, which produced a probability of 99.9999994%. A very high probability indicates that the alleged father's DNA is consistent with being the biological father at every tested marker.
What each term means
- STR loci — short tandem repeat locations on the DNA that are analysed and compared between the tested individuals.
- Combined Paternity Index (CPI) — how much more likely the observed genetic evidence is if the alleged father is the biological father rather than an unrelated random man.
- Probability of Paternity — the CPI converted to a percentage using the assumed prior probability.
- Prior probability — the starting likelihood assumed before the DNA evidence is applied (0.50 in the example).
- Reference population — the population statistics used to interpret the markers (the example used the Asian population).
Why you may see "99.99...%" and not "100%"
A probability of paternity is a statistical figure, so it is expressed as a very high percentage rather than a flat 100%. An exclusion, by contrast, is a definitive conclusion and is not reported as a probability. This is the standard convention used in accredited parentage testing.
Inclusion vs Exclusion: What Each Result Means
Every paternity result falls into one of two main categories, plus a small number of cases that are inconclusive.
Inclusion ("cannot be excluded")
The alleged father's DNA matches the child's inherited paternal markers at every tested locus.
- Reported as a high probability of paternity
- The probability is specific to your case
- Supported by the Combined Paternity Index
Exclusion ("is excluded")
The laboratory finds genetic mismatches at multiple loci between the alleged father and the child.
- A definitive conclusion, not a probability
- The alleged father is not the biological father
- Reported clearly in the Statement of Results
Representative Example: An Exclusion Result
When the genetic evidence shows that the alleged father is not the biological father, the report states an exclusion. Here is how that is worded, again anonymized:
Representative example — Statement of Results (exclusion)
Combined Direct Index
The alleged father is excluded as the biological father of the tested child. This conclusion is based on the non-matching alleles observed at the STR loci listed above with a DI equal to 0. The probability of paternity is 0%.
Combined Direct Index
0
Probability of Paternity
0%
The report supports the conclusion with a per-locus table. The Direct Index (DI) at each STR locus contributes to the overall result. A DI of 0.000 marks a locus where the child's allele could not have come from the alleged father — a mismatch. Multiple mismatching loci give a Combined Direct Index of 0 and a definitive exclusion.
| STR Locus | DI | Child | Alleged Father |
|---|---|---|---|
| D3S1358 | 1.356 | 15, 17 | 16, 17 |
| D1S1656 | 0.000 | 15.3, 17 | 12, 17.3 |
| D2S441 | 0.837 | 11, 14 | 10, 11 |
| D13S317 | 0.000 | 8, 10 | 11 |
| Penta E | 3.471 | 7, 14 | 12, 14 |
| D16S539 | 0.000 | 9, 10 | 12 |
| vWA | 2.034 | 17 | 16, 17 |
| D7S820 | 0.000 | 9, 12 | 10, 11 |
Excerpt only — a full report lists all STR loci analysed. Rows shaded red show loci with a Direct Index of 0.000 (non-matching alleles). In this example the mother was not tested and the reference population used was Hispanic.
Key takeaway
An exclusion is definitive: the child inherited alleles that the alleged father does not carry at multiple loci, so the Combined Direct Index is 0 and the probability of paternity is reported as 0%. Unlike an inclusion, an exclusion is not expressed as a high or low probability — it is a conclusion.
Inconclusive Results and Sample Quality
Can a paternity test be inconclusive?
Occasionally, a sample does not produce a complete or reliable DNA profile. When the laboratory cannot reach a clear inclusion or exclusion, the result is described as inconclusive. An inconclusive result is not the same as a negative result — it simply means the available genetic data was not sufficient to reach a conclusion.
If this happens, the laboratory may request a new sample. In most cases a fresh cheek swab resolves the issue, and re-testing is handled directly by our support team.
What can affect DNA sample quality
The cheek swab collects cells from inside the mouth. The aim is to capture enough clean DNA for the laboratory to build a full profile. A few simple habits protect sample quality:
Before collecting
- Avoid food and drink for about 30 minutes before swabbing
- Avoid smoking or vaping just before collecting
- Rinse with water if needed — do not use mouthwash
While collecting
- Do not touch the swab tip with your fingers
- Rub firmly against the inside cheek — a light touch may not collect enough cells
- Let the swab air-dry as instructed before sealing the envelope
Following the collection requirements carefully greatly reduces the chance of an inconclusive result. See also our at-home kit guide and the full DNA test procedure.
How We Protect the Integrity of Your Result
Validated Methods
Analysis follows the accredited laboratory's validated protocols using the PowerPlex® Fusion System and ABI PRISM® 3130xl analyzer.
Independent Review
Each report is reviewed and signed by both a Laboratory Supervisor and a Quality Manager before release.
Accredited Laboratory
Testing is performed by Endeavor DNA, Inc., an A2LA and ISO/IEC 17025:2017 accredited laboratory (A2LA Certificate 4049.01).
Important note on intended use
Paternity.ph at-home kits are for personal knowledge only. Because samples are not collected under a strict chain of custody, the results are informational and are not intended for court, immigration, or other legal purposes. If you need a legally admissible result, see our legal DNA testing option.
Accuracy and Results: Frequently Asked Questions
How accurate is a DNA paternity test?
A paternity test produces two kinds of answers. An exclusion (the alleged father is not the biological father) is a definitive conclusion. An inclusion (he cannot be excluded) is reported as a probability of paternity that is specific to your case and is often far above 99.9%. There is no single accuracy percentage that applies to every case; the meaningful figure is the one calculated from your samples.
What does a 99.9999994% probability of paternity mean?
It means that, given the genetic evidence in that case and the reference population used, the probability that the alleged father is the biological father is 99.9999994% — compared to an untested, unrelated random individual, assuming a prior probability of 0.50. The exact figure differs from case to case.
What is the Combined Paternity Index (CPI)?
The CPI expresses how much more likely the genetic evidence is if the alleged father is the biological father rather than an unrelated random man. The laboratory converts the CPI into the probability of paternity reported on your Statement of Results.
What is the difference between an inclusion and an exclusion?
An inclusion means the alleged father's DNA matches the child's inherited paternal markers at every tested locus, so he cannot be excluded. An exclusion means there are genetic mismatches at multiple loci, so he is not the biological father. Exclusions are definitive; inclusions carry a case-specific probability.
Can a DNA paternity test be inconclusive?
Yes, occasionally a sample does not yield a complete profile. This is called an inconclusive result and is not the same as a negative result. The laboratory may request a new sample, and a fresh cheek swab usually resolves it.
Is the at-home test valid for legal purposes?
No. At-home kits are for personal knowledge only and are not collected under a strict chain of custody. For a court-admissible result, choose our legal DNA testing service.
Who performs the laboratory testing?
Testing is performed by Endeavor DNA, Inc., an A2LA and ISO/IEC 17025:2017 accredited laboratory (A2LA Certificate 4049.01). Every report is reviewed and signed by a Laboratory Supervisor and a Quality Manager before release.
What should I do if I don't understand my result?
Email support@paternity.ph and our team will walk you through the terminology on your report. You can also review the results timeline to understand when to expect your report.
🇵🇭 Para sa mga Filipino
Gaano Katumpak ang DNA Paternity Test?
Ang resulta ng DNA paternity test ay may dalawang uri. Kapag na-exclude ang lalaki, ito ay tiyak na konklusyon — hindi siya ang biological na ama. Kapag hindi ma-exclude, may ibinibigay na probability of paternity na partikular sa inyong kaso at kadalasang mas mataas pa sa 99.9%.
Ano ang ibig sabihin ng probability of paternity?
Ito ang posibilidad na ang sinasabing ama ang tunay na biological na ama, base sa genetic na ebidensya. Halimbawa, sa isang aming report ang resulta ay 99.9999994%. Nag-iiba ang bilang sa bawat kaso — walang isang porsyento na pareho para sa lahat.
Saan isinasagawa ang pagsusuri?
Ang testing ay isinasagawa ng Endeavor DNA, Inc., isang laboratoryong akreditado ng A2LA at ISO/IEC 17025:2017 (A2LA Certificate 4049.01). Bawat report ay sinusuri at pinipirmahan ng Laboratory Supervisor at Quality Manager bago ilabas.
Mahalaga: Para sa personal na kaalaman lamang
Ang at-home kit ay para sa personal na kaalaman lamang at hindi balido para sa korte dahil walang strict chain of custody. Para sa legal na gamit, pumili ng legal DNA testing.
📞 May Katanungan?
Mag-email sa support@paternity.ph kung may hindi ka maintindihan sa iyong resulta. Tutulungan ka ng aming team.
Ready to Get Started?
Order your at-home DNA paternity test kit and receive an accredited laboratory report with your results in about 7 days. Confidential and affordable at ₱14,900.
Free shipping nationwide. At-home results in 7 days. For personal knowledge — not valid for legal court.